FEATURES
The suspension of pigments and fillers in alkyd varnish, modified with silicone
APPLICATIONS
-
- For external and internal surfaces of brick, concrete, cement, asbestos, wood and metal products in the construction of housing, industrial buildings and in the industry.
- The enamel has high frost, moisture resistance, resistance to direct sunlight; it is well proved for use in buildings with high humidity.
PHYSICAL AND CHEMICAL PROPERTIES
| Name of parameter and unit of measure | Standard |
| Appearance of enamel film | After drying, the coating must be smooth, uniform, semigloss or matte, with no foreign inclusions; a slight shagreen is allowed. |
| Funnel viscosity by viscosimeter ВЗ-246, s, at temperature (20±5)°С for enamel base |
80 – 120 |
| Mass fraction of solids in the enamel base, %, min. | 55 |
| Milling degree, um, max. | 30 |
| Drying time to degree 3 at temperature (20±5)°С, h, max. | 36 |
| Film hardness by pendulum TML (pendulum А), relative units, min. | 0,10 |
| Bending elasticity of enamel coating, mm, max. | 1 |
| Coating impact strength, on the device U-1a сm, min. | 40 |
| Coating adhesion, points, max. | 1 |
|
Resistance to static action of water at a temperature of (20±2)°C, h, min. |
24 |
| Spreading rate of enamel, g/m2, max | 100 |
COLOURS Wide colours range is available. It is possible to select colors by RAL or costumer sample.
COATING Apply the enamel on primed or not primed surface. The recommended primer coats are alkyd GF-021 or PF-020.
APPLICATION METHODS
• hand method (with brush or roller);
• spraying (aerial or airless).
CONSUMPTION Material consumption on the primed flat surface – one layer from 120 g/m2.
SAFETY INFORMATION The enamel film in cured state is not toxic.
GUARANTEED SHELF LIFE 12 MONTHS