FEATURES
The suspension of pigments and fillers in alkyd varnish, a modified silicone.
APPLICATIONS
-
- For protective and decorative coatings in the home, construction and industry of interior and exterior surfaces of metal and wood products, brick, concrete, cement, asbestos, pre-cleanedand degreased.
- The coating has high performance characteristics – excellent weather resistance, frost, moisture resistance, resistance to direct sunlight.
PHYSICAL AND CHEMICAL PROPERTIES
| Name of parameter and unit of measure |
Standard
|
|
Appearance
|
After drying, the coating must be smooth,
homogeneous, semi-matt or satin,
gloss, no foreign matter is allowed a small shagreen |
|
Relative viscosity by VZ-246, with, at a temperature of (+20±5)°C for enamel base
|
max. 60
|
|
Mass concentration of nonvolatile substance in the basis of the enamel %, min.
|
55
|
|
Milling degree, mkm, max
|
40
|
|
Drying time to the degree 3 at a temperature of (20 ± 5) °C, h, max.
|
48
|
|
Elasticity of enemal coating at bending, mm, max.
|
2
|
|
Film elasticity Flexural mm, max.
|
2
|
|
Film impact strength cm, min.
|
15
|
|
Adhesion film points, max.
|
24
|
| Hiding power enamel g/m2, max. | 100 |
The wide range of colors. Possible selection of RAL
COATING Apply the enamel on primed or not primed surface. The recommended primer coats are alkyd GF-021 or PF-020.
APPLICATION METHODS
• hand method (with brush or roller);
• spraying (aerial or airless).
CONSUMPTION Material consumption on the primed flat surface – one layer from 120 g/m².
SAFETY INFORMATION The enamel film in cured state is not toxic.
GUARANTEED SHELF LIFE 12 MONTHS
* various products names are allowed for different markets