WATERPROOF RUBBER MASTIC ZHKMG

FEATURES

Self-curing two-component system consisting of rubber base and hardener mixed by customer immediately before use.

APPLICATIONS

Construction and repair of the buildings and structures:

  • Joints sealing of concrete and reinforced concrete structures with a maximum deformation of 25%
  • Building structures junctions sealing
  • Gaps and cracks sealing

Advantages

  • The material is hydrophobic and provides hydrophobicity of the treated objects
  • Mastic is resistant to the influence of atmospheric factors
  • Mastic is resistant to the action of ozone and ultraviolet
  • The material has good dielectric properties

PHYSICAL AND MECHANICAL PROPERTIES

Name of parameter and unit of measure Standard
Color of coating Must conform to the approved sample color
Appearance Homogeneous, without impurities
Nominal strength, MPa, min. 0,6*
Elongation, %, min. 200
Bond strength to concrete, MPа,  min. 0,4
Water absorption for 24 h, %, max. 0,4
Flexibility on a bar with a diameter of 5 mm at -30°C 5,0+0,2
Heat resistance, %, max. 1,0
Water tightness, min MPа 0,03
Time 10 min
Curing time at 20°С, h, max. 24
Shelf life (viability) of mastic at temperature (20±2)°С, h, min. 1,0
Lightfastness, h, min. 2
Note* When reinforcement with fiberglass, glass or polyester mesh – (3-3.5) MPa

 

THE MASTIC PREPARATION

Before application, thoroughly mix the mastic base with the hardener in the ratio 4 parts by weight of hardener for 100 parts by weight of base (or as indicated in the passport for batch of products). For mixing we recommend to use a slow speed drill with the mixer for viscous pastes.

WARNING! Pot life of mastic at 20°C is up to 1 hour.

 COATING

Apply the mastic with a spatula, a syringe or other device. Mastic layer shall be at least 5 mm. The mastic should be applied evenly, without breaks, rolls and voids. Never use mastic in the rain and snow, if there is a risk of precipitation on the surfacemastic puts.

GUARANTEED SHELF LIFE 12 months

download a catalogue