FEATURES
Suspension of aluminum powder in organosilicon heat-resistant varnish KO-08K, an organic solvent and additives.
APPLICATIONS
- Protect materials from high temperatures (up to +400ºС) exposure
- Surface protection
- Restoration of the damaged paintwork
- Hydrophobisation
- Decorative treatment
- Parts and elements of the equipment
- Car parts
- Metal surfaces protection of Mild steel, Phosphated surfaces, Nonphosphated surfaces
Advantages
- Enamel has a high heat resistance (used for parts painting, continuously operating at temperatures (-40°С – +400°С)
- Increases the life-time of the coated surfaces
- The enamel coated surface has a high resistance to the action of the salt mist
- Provides enhanced moisture resistance
- Provides a durability to the mechanical loads
- Restores damaged paint coating
PHYSICAL AND CHEMICAL PROPERTIES
| Name of parameter and unit of measure |
Standard |
| Appearance of enamel coating |
Homogeneoussmooth surface |
| Funnel viscosity, s |
17-45 |
| Mass fraction of solids, % |
52-58 |
| Drying time at temperature (130±2)°С to degree 3, minutes, max. |
30 |
| Coating adhesion, points, max. |
2 |
| Film hardness by pendulum TML (pendulum А), relative units, min. |
0,10 |
| Volume resistivityof the film, Ohm*m, min. |
1×106 |
| Moisture resistance of coating,h, min. |
150 |
| Heat resistance, ºC, min. |
400 |
| Resistance to alternating exposure to heat and water, cycles, min. |
5 |
COLOUR Silver
MATERIAL CONSUMPTION One layer from 120 g/m2.
SAFETY INFORMATION The enamel film in cured state is not toxic and fireproof.
GUARANTEED SHELF LIFE 12 months
* various products names are allowed for different markets