FEATURES
Two-component enamel composed of base (organosilicon heat resistant varnish KO-85) and filler (aluminium powder PAP-2).
APPLICATIONS
- Painting of metal surfaces exposed to temperatures up to +400°C.
- Surface protection
- Restoration of the damaged paintwork
- Hydrophobisation
- Decorative treatment
Metal surfaces: Exhaust pipes, Boilers details, Chimneys, Ejectors, Energy equipment
Advantages
- Enamel has a high heat resistance (used for parts painting, continuously operating at temperatures up to +400°C)
- Increases the life-time of the coated surfaces
- The enamel coated surface has a high resistance to the action of the salt mist
- Provides enhanced moisture resistance
- Provides a durability to the mechanical loads
- Restores damaged paint coating
PHYSICAL AND CHEMICAL PROPERTIES
| Name of parameter and unit of measure |
Standard |
| Funnel viscosity, s |
12-18 |
| Drying time for coating at temperature (20±5)°С to degree 3, h, max. |
2 |
|
Coating impact strength by device U-1, cm, min. after heat treatment within 3 hours at temperature +330°С – +350°С |
50 |
| Resistance of coating tostatic action of water and gasoline, h, min. |
24 |
ENAMEL PREPARATION
Immediately before use introduce the aluminium powder into the varnish (in the ratio 5 parts by weight of powder for 100 parts by weight of varnish) and mix thoroughly.
SAFETY INFORMATION
The enamel film in cured state is not toxic and fireproof.
GUARANTEED SHELF LIFE 36 months
* various products names are allowed for different markets