FEATURES
Two-component painting material consisting of epoxy resin and base (dispersion of pigmentsand epoxy hardener water emulsion).
APPLICATIONS
For exteriors, interiors, underground coating:
- Equipment surfaces
- Anticorrosion protection
- Concrete surfaces
- Metal surfaces
- Nuclear power industry applicable
- Underground pipes
- Ballast tanks
- Sea containers
- Vessel’s hull
- Bridges parts
- Railway transport
- Agricultural machinery
- Oil tanks and pipes
Advantages
- The coating is resistant to water, to the constant action of water and condensate
- The enamels can also be used as a primer for pipes exposed to condensation
- The best protection for instruments operating in tropical climates
- It is used for deactivating finishing of building structures, premises and external surfaces of equipment of nuclear power facilities
ADDITIONAL INFORMATION
After the primer has dried (about 24 hours), enamel is applied in 2-3 layers. Each subsequent coat is applied after the previous layer has dried (about 24 hours).
The enamelis evenly applied to the prepared surface. Painting must be repeated in a case of the surface high porosity, but not earlier than 24 hours. When painting, avoid the puddles formation of the working compound.
The prepared composition is used within 45 minutes at temperatures up to + 20°С. At a higher temperature the prepared mixture viability decreases.
The enamels’s drying time is 24 hours at a temperature of +20°C and a relative humidity of up to 60%.
The temperature of the ambient air, the surface and the applied material should be between +5°C and +35°C, relative humidity max. 80%.
APPLICATION METHODS:
- with brush or roller
- pneumatic spraying
- airless spraying
CONSUMPTION One layer from 0,15 kg/m2(depending on the treatment surface porosity)
SAFETY INFORMATION The enamel’s film in cured state is not toxic and fireproof.
GUARANTEED SHELF LIFE 12 MONTHS
download a catalogue