FEATURES
Two-component material consisting of epoxy resin and base (dispersion of pigments, fillers and epoxy hardener water emulsion).
APPLICATIONS
- For metal surfaces
- For paint coatings
- For reinforced concrete based surfases
- Indoor and outdoor treatment
- For concrete based surfases
- Repair and restoration works
Advantagies
- High adhesion to the substruction
- Primer is water-repellent, and imparts hydrophobic properties to the surfaces
- Good chemical resistance
- Has increased heat resistance up to +80°C
- The coating is resistant to negative temperature up to -35°C
- Low curing temperature +5°C
ADDITIONAL INFORMATION
The primer is evenly applied to the prepared surface. Priming must be repeated in a case of the surface high porosity, but not earlier than 24 hours. When priming, avoid the puddles formation of the working compound.
The prepared composition is used within 45 minutes at temperatures up to + 20°С. At a higher temperature the prepared mixture viability decreases.
The primer’s drying time is 24 hours at a temperature of +20°C and a relative humidity of up to 60%.
The temperature of the ambient air, the surface and the applied material should be between +5°C and +35°C, relative humidity max. 80%.
APPLICATION METHODS roller, brush, pneumatic or airless spraying.
CONSUMPTION 0,1 kg/m2
GUARANTEED SHELF LIFE 12 MONTHS