FEATURES
Two-component paint material comprising base enamel (suspension of pigments, plasticizers, fillers in the solution of epoxy and urea-formaldehyde resins with the addition of dispersants and corrosion Inhibitors) and hardener. (Look at physical and mechanical properties for differences)
APPLICATIONS
- For interiors, exteriors & underground
- Anticorrosion protection
- Concrete surfaces
- Metal surfaces
- Nuclear power industry applicable
- Underground pipes
- Ballast tanks
- Sea containers
- Vessel’s hull
- Bridges parts
- Railway transport
- Agricultural machinery
- Oil tanks and pipes
- Equipment surfaces
Advantages
- The coating is resistant to water, to the constant action of water and condensate
- The enamels can also be used as a sealant
- The coating on wet surfaces is possible
- The enamels can also be used as a primer for pipes exposed to condensation
- The best protection for instruments operating in tropical climates
- It is used for deactivating finishing of building structures, premises and external surfaces of equipment of nuclear power facilities
- Wide color range is available. It is possible to select colors by RAL or consumer sample
PHYSICAL AND MECHANICAL PROPERTIES
| Name of parameter and unit of measure | Standard for Aquakor-5 | Standard for Epoguard enamel |
| Appearance of coating | Homogeneous smooth surface | |
| Funnel viscosity of enamel basis, с, min. | 60 | 60 |
| Mass fraction of solids in the semi-inished product of enamel, %, min. | 49 | 50 |
| Milling degree of enamel basis, um, max. | 35 | 30 |
| Drying time to degree 3 at temperature (20±2)°С, h, max. | 20 | 24 |
| Bending elasticity of the coating, mm, max. | 2 | 3 |
| Coating impact strength, on the device U-1a сm, min. | 40 | 40 |
| Coating adhesion, points, max. | 1 | 2 |
| Viability of enamel at ( 20±2)°С, h, min. | 5 | 7 |
| Spreading rate of enamel, g/m2, max | 150 | 120 |
APPLICATION METHODS:
- with brush, roller (relative viscosity of enamel – 55-80 s);
- pneumatic spraying (relative viscosity of enamel – 25-30 s);
- airless spraying (relative viscosity of enamel – 30-55 s).
CONSUMPTION
One layer – from 150 g/m2.
SAFETY INFORMATION
The enamel’sfilm in cured state is not toxic and fireproof.
GUARANTEED SHELF LIFE 6 MONTHS