FEATURES
The suspension of pigments and fillers in alkyd varnish with the addition of solvents, drier and stabilizer.
Characterized by two possible modes of drying; the film formed with primer coating is resistant to temperature fluctuations from -50ºC to +60ºC.
APPLICATIONS
- For priming metal and wood surfaces before coating with various enamels, as well as temporary corrosion protection in a single layer coating of large metal structures on the period of installation and storage.
PHYSICAL AND CHEMICAL PROPERTIES
| Name of parameter and unit of measure | Standard |
| Viscosity by viscosimeter В3-246 with nozzle diameter 4 mm, s. | 60-100 |
| Mass fraction of solids, % | 53-59 |
|
Drying time to degree 3 at temperature: – (18-22)°С – (100-110)°С |
max 12 hours max 35 min. |
| Coating adhesion, points | 1 |
| Milling degree, um | 30 |
| Coating strength, measured by pendulum type M-3, conventional units, min | 0,35 |
| Bending elastisity, mm | 1 |
|
Coating strength at temperature (20+-2)°С to a static action, h: -nitro enamel -3%-solution of sodium chloride -mineral oil -water |
Passed the test 48 240 144 |
| Film impact strength, cm | 50 |
Сolour: Red-brown
download a catalogue