FEATURES
A three-component material consisting of a base (epoxy hardenerwater emulsion), a resin part (modified epoxy resin) and a diluent (demineralized water).
APPLICATIONS
- For epoxy self-levelling floors
- For paint coatings
- For reinforced concrete based surfases
- For concrete based surfases
- Repair and restoration works
Advantagies
- High adhesion to the substruction
- Primer is water-repellent, and imparts hydrophobic properties to the surfaces
- Can be applied to a wet surface
- Applying to a concrete surface without waterproofing
- Applying to a new (fresh) concrete (14 days after the concrete laying)
- Has increased heat resistance up to +80°C
- The coating is resistant to negative temperature up to -35°C
- Low curing temperature +5°C
ADDITIONAL INFORMATION
The primer is evenly applied to the prepared surface. Priming must be repeated in a case of the surface high porosity, but not earlier than 24 hours. When priming, avoid the puddles formation of the working compound.
The prepared composition is used within 60 minutes at temperatures up to + 20°С. At a higher temperature the prepared mixture viability decreases.
The primer’sdrying time is 24 hours at a temperature of +20°C and a relative humidity of up to 60%.
The temperature of the ambient air, the surface and the applied material should be between +5°C and +35°C, relative humidity max. 80%.
APPLICATION METHODS roller or brush.
CONSUMPTION 0,3 – 0,5 kg/m2 (depending on the treatment surface porosity)
GUARANTEED SHELF LIFE 12 MONTHS