FEATURES
The suspension of pigments and fillers in a solution of organosilicon polymer resin in organic solvents, with the addition of special agents.
APPLICATIONS
- Painting of metal surfaces exposed to temperatures up to +400°C.
- Surface protection: Metal surfaces, Concrete, Brick, Asbestos-cement
materials, Foam concrete, Cement-fibrous materials, Wood, Chipboard and fiber materials, OSB, MDF, HDF - Restoration of the damaged paintwork
- Hydrophobisation
- Decorative treatment
Advantages
- Enamel imparts a water-repellency for painted surfaces
- Provides frost resistance
- Enamel is resistant to the sunlight action and weathering
- Enamel has fungicidal properties (prevents the formation of fungus and mold)
- Well proven in painting rooms with high moisture
- Protects surfaces aggressive media contacted, in particular, with the salt
- The coatings drying time at a temperature from +15°С to +35°С is no more than 20 hours (less than one day)
- Allowed to use for surfaces previously painted with oil, pentaphthalic or glyptal enamels, without removing the old layer, that have no blisters and delaminations
PHYSICAL AND CHEMICAL PROPERTIES
| Name of parameter and unit of measure |
Standard |
| Funnel viscosity, s, min. |
40 |
| Mass content of nonvolatile substances, % |
55-75 |
|
Drying time of enamel coating, h, at temperature (25±10)°С, no more: to degree 1 to degree 3 |
1 20 |
| Bending elasticity of the coating, mm, max. |
2 |
| Coating impact strength, on the device U-1a, сm, min. |
40 |
| Coating adhesion, points, max. |
2 |
COLOR
Wide color range is available. It is possible to select colors by RAL or costumer sample.
APPLICATION METHODS
- With brush or roller
- By spraying
Dilute if necessary to required viscosity as follows: for industrial use – toluene, xylol, solvent or their mixture in any ratio; for domestic use – butyl acetate and white spirit,nefras-S4-155/200 in the ratio 3:1, ethyl acetate and white spirit, nefras-S4-155/200 in the ratio 3:1, white spirit/nefras-S4-155/200, solvent.
MATERIAL CONSUMPTION
-primer – 140-250 g/m2 (depending on surface porosity)
– enamel – one layer from 150 g/m2
SAFETY INFORMATION
The polymerized lacquer coat is nontoxic, fire-safe.
GUARANTEED SHELF LIFE 12 months
* various products names are allowed for different markets