FEATURES
Two-component enamel composed of base (organosilicon heat resistant varnish KO-815) and filler (aluminium powder PAP-2)
APPLICATIONS
- Protection painting of metal surfaces exposed to temperatures up to +500°C.
- Surface protection
- Restoration of the damaged paintwork
- Hydrophobisation
- Decorative treatment
Metal surfaces: Exhaust pipes, Boilers details, Chimneys, The wires tails, Ejectors, Details and units for instrumentations, Agricultural machinery, Industrial production facilities and constructions
Advantages
- Enamel has a high heat resistance (used for parts painting, continuously operating at -40°С – +500°С)
- Increases the life-time of the coated surfaces
- The treated surfaces acquire increased resistance to the aggressive medium, petrol-resistant
- Penetrates deeply into porous bases
- Restores damaged paint coating
- Provides a durability to the mechanical loads
- Protects against water influence
- Provides resistance to the effects of atmosphere and weather conditions
- The treated surfaces demonstrate resistance to oils and lubricants
PHYSICAL AND CHEMICAL PROPERTIES
| Name of parameter and unit of measure |
Standard |
| Funnel viscosity, s |
10-14 |
| Drying time for coating at temperature (150±5)°C to degree 3, h, max. |
2 |
| Bending elasticity of coating, mm, max. |
3 |
|
Coating impact strength by device U-1, cm, min. at temperature 20°C
After heat treatment within 3 hours at temperature 450-500°C |
35
15 |
| Resistance of coating tostatic action of water and gasoline, h, min. |
24 |
ENAMEL PREPARATION
Immediately before use introduce the aluminium powder into the varnish (in ratio 6 parts by weight of powder for 94 parts by weight of varnish) and mix thoroughly.
SAFETY INFORMATION
The enamel film in cured state is not toxic and fireproof.
GUARANTEED SHELF LIFE 36 months
* various products names are allowed for different markets